Refinishers & Trade Professionals

Meet NAPCO’s Spray-On Tile Floor Coating

NAPCO’s Spray-On Tile Coating was created with you in mind. We developed our strongest ever coating due to the high-demand request from our customers.

  • Scuff & Mar Resistant
  • Stain Resistant
  • Easy Application

Now Available: Order Yours Today!
NAPCO-Before
NAPCO-After

With its advanced features and superior quality, the product will create new opportunities for expansion, allowing you to tap into untapped markets and establish a strong presence in the refinishing industry.  

NAPCO’s new Spray-On Tile Floor Coating will significantly boost your business's revenue by attracting a larger customer base and increasing the number of refinishing jobs.

Centered
Your Amazing Headline Goes Here NAPCO

NAPCO Spray-On Tile Floor Coating 

Rust-oleum HOME 

Sherwin-Williams Tread-Plex 

Napco Icons-01

Can be matched to any color.

Napco Icons-01

Can be matched to any color. 

Napco Icons-02

Four standard colors; or SW colors.

Napco Icons-01

Engineered for wear, scuff, and mar resistance. 

Napco Icons-01

Engineered for wear, scuff, and mar resistance. 

Napco Icons-02

Engineered for wear and slip resistance.

Napco Icons-01

Finishes include Semi-Gloss (Coming Soon: Matte)

Napco Icons-01

Finishes include Semi-Gloss and Matte 

Napco Icons-02

Finish is Semi-Gloss 

Napco Icons-01

Sprayable using HVLP and
#3 needle (1.0-1.3mm) 

Napco Icons-02

Roll and brush 

Napco Icons-02

Roll and brush 

Napco Icons-01

2K Solventborne Polyurethane 

Napco Icons-02

1K Waterborne

Napco Icons-02

1K Waterborne Acrylic 

Napco Icons-01

Cures in as little as two hours
(Return to use time - 24 hours)

Napco Icons-02

Full cure in seven days.

Napco Icons-02

Full cure in seven days. 

Napco Icons-01

Dries quickly – 10 minutes or less per coat and 20 to 25 minutes after the last coat. 

Napco Icons-02

Base coat dries in six hours; top coat dries to light foot traffic in 24 hours and furniture replacement in 72 hours. 

Napco Icons-02

Top coat dries to foot traffic in 8 hours and heavy traffic in 18 hours. 

 

"Easier prep and application than bathtubs! Very durable coating. You wouldn't have known the bathroom was completely remodeled after the tile floor was sprayed. Not one mark was made during the remodel. Very impressive! "

- Marie B., NAPCO Certified Refinisher

Frequently Asked Questions

Q. What additional tools or equipment will I need to purchase?
You already have almost everything you need! The only thing you will need to purchase are a set of shoe spikes to protect the floor while you are spraying.
Q: How does NAPCO’s Spray-On Tile Floor Coating Adhesion work?
A: The adhesion will be the same as refinishing a bathtub tile surround. Following these steps will give you both the mechanical and chemical bond required. Step 1: Clean with piranha prep Step 2: Apply Gorilla Grip.
Q: Is there a suggested warranty for this product?
A: 1-5 years depending on traffic. If this is in a main lobby or walkway it's suggested to give a shorter warranty. If in a rarely used guest bathroom, warranty longer.
Q: How do I prepare the area I will be coating?
A: You will need to prep with tape and use protective items such as a drop cloth, masking paper, or painter's plastic to protect baseboards, cabinets, etc depending on the area before spraying the floor.
Q: Will this coating work for grout lines?
A: Yes. You can spray right over grout lines which will also seal and protect them. However, if they’re dirty, you will need to clean them before spraying.
Q: When is the right time to spray the floor?
A: Spraying the floor should be last – on your way out once the tub, surround and vanity are completely dry so you can mask up. Remember, you must wear shoe spikes. This will keep you safely up off the floor and will prevent damaging the floor as you are spraying your second and final coat.
Q: How can I prevent overspray on the floor?
A: Check the flow on your air valve before spraying to ensure overspray is minimized. If it's causing overspray then you need to adjust the valve to reduce the air pressure.
Q: When is this product considered "Dry to Tack" ?
A. Wait at least 15 mins in between coats. You can use a box fan to speed up the drying, however make sure the fan is not on while spraying.